Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
R-MODE MENU { RACING MODE }
In the default configuration, after Activating the Racing Mode function, you can switch between Racing Modes using the Racing
Mode Switch (Trim Switch Trm4). The R-MODE LED will change color to indicate the currently Active Racing Mode (see table on
previous page). In addition, the currently Active Racing Mode will be displayed on the STATUS screen. When you switch between
Racing Modes, the currently Active Racing Mode will be momentarily displayed in a pop-up window.
Racing Mode functions will vary depending on the current Car Type. For a complete list of Racing Mode functions based on
Car Type, see the Racing Mode Functions by Car Type tables on pages 113 and 114.
Turning Racing Mode ON and OFF:
1) From within the RACING menu, scroll UP or DOWN to highlight the R-MODE
menu.
2) Press the ENTER key to open the R-MODE menu. R-MODE > INH will be
highlighted.
3) Press the ENTER key, then scroll UP or DOWN to choose the desired R-MODE
value, either 2, 3, 4, 5 or INH (Racing Mode OFF). The number you choose
determines how many different Racing Modes you can program and switch
between while driving.
R-MODE setting range is 2, 3, 4, 5 and INH. The default setting is INH.
Turning Separate Functions ON and OFF:
When Racing Mode is turned ON (R-MODE > 2, 3, 4 or 5), various functions can be programmed the same for all Racing Modes
or they can be programmed independently, allowing you to have different function Programming Values for each of the Racing
Modes. For example, with D/R ST set to ON, you can choose a Dual Rate Steering percentage value of 100% for Racing Mode 1,
a Dual Rate Steering percentage value of 90% for Racing Mode 2 and so on.
1) From within the R-MODE menu, scroll UP or DOWN to highlight desired
function you would like to turn ON or OFF.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired value,
either ON or OFF. When set to ON, you will be able to choose different
function Programming Values for each Racing Mode. When set to OFF,
function Programming Values will be the same for all Racing Modes.
3) Press the ENTER key, then repeat steps 1 and 2 to change any other desired values. For a complete list of Racing Mode
functions based on Car Type, see the Racing Mode Functions by Car Type tables on pages 113 and 114.
SEPARATE functions setting range is OFF and ON. The default setting for all functions is OFF.
Switching Racing Modes to Program Separate Functions:
If you've chosen to program one or more Racing Mode functions separately, a
Racing Mode Icon will be displayed within the specific function Programming
Menu to indicate which Racing Mode you're currently programming the function for.
To program different values for each Racing Mode, make sure to switch to the
desired Racing Mode first. For example, with SEPARATE D/R ST > ON, open the
D/R menu. An R1, R2, R3, R4 or R5 Racing Mode Icon will be displayed next to
the Steering function, depending on which current Racing Mode is Active.
Use the Racing Mode Switch (Trim Switch Trm4) to switch to Racing Mode 1. R1
will be displayed next to the ST > 100% percentage value. Choose the desired Steering Dual Rate percentage value for Racing
Mode 1, then press Trim Switch Trm4 to switch to Racing Mode 2. R2 will be displayed next to the ST > 100% percentage value.
Choose the desired Steering Dual Rate percentage value for Racing Mode 2. While you're driving, you can now switch to different
Dual Rate settings simply by switching Racing Modes.
The Racing Mode Icon will only be displayed for Programming Menus within the RACING menu and only if the specific
function's Separate value is set to ON in the R-MODE menu. If no Racing Mode Icon is displayed, the function Programming
Value will be the same regardless of which Racing Mode is currently Active.
88
Telemetry System with Sanwa Synchronized Link Support
RACING
Advertisement
Table of Contents
