Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
CUSTOM MENU OVERVIEW
The following Programming Menus are available within the CUSTOM menu:
MENU
CH-SET
Adjust Programming Values for Common Functions in One Convenient Location
CH-SET MENU { CHANNEL SET MENU }
The CH-SET menu allows you to make a number of common function Programming Value changes to all four channels without
the need to enter each of those function's Programming Menus separately. For example, you can make all of your desired
Programming Value choices for functions such as End Point Adjustment, Exponential, Curves, Servo Speed, Fail Safe settings and
more for each channel, all from within the same menu.
If Racing Mode is turned ON and if you've chosen to program one or more Racing Mode functions separately, a Racing Mode
Icon will be displayed next to the function Programming Value to indicate which Racing Mode you're currently programming the
function for. For more information, see the R-MODE Menu section on pages 87 and 88.
This section details how to use the CH-SET menu. For information about programming each of the Programming Menus
within the CH-SET menu, refer to the specific Programming Menu sections detailed previously.
Choosing the Channel:
1) From within the CUSTOM menu, scroll UP or DOWN to highlight the CH-SET
menu.
2) Press the ENTER key open the CH-SET menu. The < ST > channel will be
selected.
3) Press the SELECT switch RIGHT or LEFT to choose the desired channel you
would like to change function Programming Values for.
Channels and function Programming Values will vary depending on the current Car Type selected. In addition, you're
unable to select a channel if it doesn't support the currently highlighted function. For example, AUX1 and AUX2 don't
support Dual Rate, so you can't select AUX1 or AUX2 when D/R is highlighted.
Changing Function Programming Values:
1) After selecting the desired channel, scroll UP or DOWN to highlight the function
Programming Value you would like to change.
2) Press the ENTER key, then scroll UP or DOWN to choose the selected function
Programming Value.
3) Press the ENTER key, then repeat steps 1 and 2 to change any other desired
function Programming Values.
Certain function Programming Values may not be displayed in the CH-SET menu because they haven't been selected in
the specific function's Programming Menu. For example, the CURVE EXP function Programming Value may be displayed
in the CH-SET menu, but if you want to change the CURVE ARC function through the CH-SET menu, you will need to first
choose the ARC function in the CURVE menu first. The CURVE ARC function Programming Value will then be able to changed
through the CH-SET menu.
Function Programming Values changed from within the CH-SET menu are duplicated in the specific function's Programming
Menu and vice-versa.
Adding Programming Menus to the CUSTOM Menu:
Many Programming Menus can be Added to the CUSTOM menu quickly and easily. This allows you to
store and then access your most-used Programming Menus all in one place within the CUSTOM menu.
Not all Programming Menus can be added to the CUSTOM menu. If a Programming Menu can be added to the CUSTOM
menu, 'C' ENTRY will be displayed in the Message Display Window when you highlight the Programming Menu.
110
Telemetry System with Sanwa Synchronized Link Support
MENU DESCRIPTION
CUSTOM
PAGE #
PG. 110
CUSTOM
Advertisement
Table of Contents
