Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
LCD MENU { DISPLAY OPTIONS }
Changing the LCD Contrast:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the LCD
menu.
2) Press the ENTER key to open the LCD menu. CONTRAST > 15 will be highlighted.
3) Press the ENTER key, then scroll UP or DOWN to choose the desired Contrast
value. Increasing the Contrast value will Increase the contrast of the LCD and
Decreasing the Contrast value will Decrease the contrast of the LCD.
CONTRAST setting range is 10 to 20. The default setting is 15.
Changing the LCD Backlight Brightness:
1) From within the LCD menu, scroll UP or DOWN to highlight BRIGHT > 4.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired Brightness
value. Increasing the Brightness value will Increase the brightness of the LCD
Backlight and Decreasing the Brightness value will Decrease the brightness
of the LCD Backlight.
BRIGHT setting range is 1 to 5. The default setting is 4.
Changing the LCD Backlight Mode:
1) From within the LCD menu, scroll UP or DOWN to highlight MODE > KEY-ON.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired LCD
Mode value. Choose from OFF, KEY-ON or ALWAYS. When set to OFF, the
LCD Backlight will be turned OFF. When set to KEY-ON, the LCD Backlight will
turn ON when a key-press is made. When set to ALWAYS, the LCD Backlight
will stay ON at all times
MODE setting range is OFF, KEY-ON and ALWAYS. The default setting is KEY-ON.
Changing the LCD Backlight Color:
1) From within the LCD menu, scroll UP or DOWN to highlight BACK LIGHT > BLUE.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired LCD
Back Light value, either Blue or White.
BACK LIGHT setting range is Blue or White. The default setting is Blue.
Changing the LCD Backlight On-Time:
1) From within the LCD menu, scroll UP or DOWN to highlight TIME > 10sec.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired LCD
Time value. The Time value (in seconds) determines how long the LCD Backlight
will stay ON before turning OFF automatically. This helps save battery power.
TIME setting range is 1 to 30 seconds. The default setting is 10 seconds.
Telemetry System with Sanwa Synchronized Link Support
T
SYSTEM
49
Advertisement
Table of Contents
