Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
SAFETY
This is a high-output, full-range radio control system that should well exceed the range needed for any surface model. For safety,
the user should perform a range test at the area of operation to ensure that the radio control system has complete control of the
model at the farthest reaches of the operational area. We recommend that the user enlist the help of a fellow modeler to walk
the model to the farthest reaches of the track (or for boats, to walk the shore line well in excess of the operational distance of the
boat), then test for proper operation. In addition, please observe the following:
• Be certain to read this User's Guide in its entirety. Think 'Safety First' for yourself, others and your equipment. Always observe
all the rules of the track, lake or field where you operate your radio control equipment.
• If at any time during the operation of your model, should you feel or observe erratic operation or abnormality, end your operation
as quickly and safely as possible. DO NOT operate your model again until you are certain the problem has been corrected.
• Your model can cause serious damage or injury. Please use caution and courtesy at all times during use.
• Do not expose the radio control system to water or excessive moisture. Waterproof the receiver and servos (not included) by
placing them in a water-tight radio box when operating R/C model boats.
• If you have little to no experience operating R/C models, we recommend you seek the assistance of an experienced modeler
or your local hobby shop for guidance.
• The Low Voltage Alert alarm will sound when the transmitter battery voltage drops to the default threshold of 4.6 volts. If this
occurs, stop using the transmitter as soon as is safely possible, then replace or recharge the transmitter batteries.
This radio control system operates on the 2.4GHz frequency band. The 2.4GHz connection is determined by the transmitter
and receiver pair. Unlike ordinary crystal-based systems, your model can be used without frequency control.
SERVICE AND SUPPORT
This product is warranted against manufacturer defects in materials and workmanship,
at the original date of purchase. This warranty does not cover components worn
by use or damage caused by improper voltage, tampering, modification, misuse,
abuse, improper wiring, reverse polarity, moisture or using outside its intended
scope of use. Terms of this warranty can vary by region. Please read the warranty
card included with your radio control system for specific warranty information.
If you have any questions or concerns, we're here to help. If you encounter a
problem with your radio control system, first check the Troubleshooting Guide
section on pages 111 through 113. If you require further help, please contact the
Airtronics or Sanwa service center in your region. For a complete list of distributors
in your region, please visit www.sanwa-denshi.com/rc/distributors.html.
Telemetry System with Sanwa Synchronized Link Support
GENERAL
GENERAL
For Service In North America:
Global Hobby Distributors
18480 Bandilier Circle
Fountain Valley, CA 92708
Telephone: (714) 963-0329
Fax: (714) 964-6236
Email: service@airtronics.net
Factory Service:
Sanwa Electronic Instrument CO., LTD.
1-2-50 Yoshida-Honmachi
Higashiosaka, Osaka, 578-0982 Japan
Telephone: 81-729-62-1277
Fax: 81-729-64-2831
Email: rcintl@sanwa-denshi.co.jp
T
3
Advertisement
Table of Contents
