Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
DMS MENU { DIRECT MODEL SELECT }
The DMS function allows you to choose up to three different models that can be selected when turning the transmitter ON. Simply
press a key while turning the transmitter ON and the Programming Data for your favorite model will load automatically.
Using the Direct Model Select Function:
1) Make sure that the transmitter is turned OFF.
2) Press and HOLD the SELECT switch Right or Left, or press and HOLD the BACK key while turning the transmitter ON. The
Model Programming Data associated with either of those key presses will automatically load.
Changing Direct Model Select Models:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the DMS
menu.
2) Press the ENTER key to open the DMS menu, then scroll UP or DOWN to
highlight the Model Name adjacent to the DMS number you would like to
change.
SELECT switch LEFT controls DMS1, SELECT switch RIGHT controls DMS2
and the BACK key controls DMS3.
3) Press the ENTER key, then scroll UP or DOWN to choose the model you want
to be controlled by that particular Direct Model Select switch.
4) Repeat step 3 to Assign any other desired models to the remaining Direct
Model Select Switches.
BIND MENU { BINDING, MODULATION TYPE, SAFETY LINK AND RESPONSE MODE }
The BIND menu allows you to change the transmitter's Modulation Type, turn the Telemetry function ON and OFF, assign a Safety
Link Number to your model's receiver, change the Channel Response Mode and Bind the transmitter and receiver pair.
All settings are model-specific, so you can have different settings to suit different models.
The Modulation Type and Safety Link Number must be chosen prior to Binding the transmitter and receiver. If these options
are changed after Binding, you will need to Bind the transmitter and receiver pair again for the changes to take affect.
**Make sure the Modulation Type you choose matches the Modulation Type of the receiver you're using!**
The following Modulation Types* are available:
FH3 - Select this Modulation Type when using Airtronics or Sanwa 2.4GHz FH3 surface receivers.
FH4T - Select this Modulation Type when using Airtronics or Sanwa 2.4GHz FH4 or FH4T surface receivers (default).
IMPORTANT: Not all BIND menu functions are supported by all Modulation Types. Only supported functions will be displayed
once a Modulation Type is chosen. For example, the FH3 Modulation Type does not support Telemetry, Safety Link or the
SSR Channel Response Mode.
Changing the Modulation Type:
The Modulation Type function allows you to choose the transmitter Modulation Type. The Modulation Type should be changed to
match the receiver you're using. For example, if you use an Airtronics or Sanwa 2.4GHz FH3 surface receiver with your transmitter,
you would need to change the Modulation Type to FH3. The Modulation Type should be chosen prior to Binding the transmitter
and receiver pair.
34
Telemetry System with Sanwa Synchronized Link Support
*Modulation Type of FH3 and FH4T are illegal in EU market. For EU market, FH3E and FH4TE are available as Legal Modulation Type.
SYSTEM
SYSTEM
Advertisement
Table of Contents
