Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
LOG SETUP MENU { DISPLAY ONLY TELEMETRY OPTIONS }
When only the DISPLAY is turned ON using the DISPLAY key, the M12S Super can be placed in Receiver Mode, allowing it to Bind
with another Airtronics or Sanwa FH3 or FH4T transmitter and read Telemetry Data from it. For example, if using an FH4T transmitter,
such as the MT-4, MT-4 Telemetry Data can be viewed on the M12S Super TELEMETRY screen or, if using an FH3 transmitter,
such as the MX-3X or M11X that doesn't support Telemetry, Steering and Throttle Output Data can be viewed on the M12S Super
TELEMETRY screen. This capability allows the M12S Super to be used as a separate Telemetry Viewer and Recorder.
To use this feature, first Bind your other transmitter to its receiver, then place the M12S Super in Receiver Mode and Bind it to your
other transmitter. With your other transmitter turned ON and operating your model, you can use the M12S Super in DISPLAY mode
to view Telemetry Data from the other transmitter.
This section details placing the M12S Super in Receiver Mode and making Steering and Throttle Point adjustments so that your
paired transmitter's Steering and Throttle Output Data is displayed correctly on the M12S Super's TELEMETRY screen.
The menus shown in this section are only visible when using DISPLAY mode. They are not visible if the M12S Super is turned
ON using the Power Switch. To turn DISPLAY mode OFF, press the DISPLAY key a second time.
Receiver Mode
Using the RX MODE menu, you are able to place the transmitter in Receiver Mode, which allows you to Bind the M12S Super
transmitter to another Airtronics or Sanwa FH3 or FH4T transmitter and read Telemetry Data from it.
Enabling Receiver Mode:
1) With the M12S Super turned OFF, press and HOLD the DISPLAY key to turn
only the Display ON.
2) From within the SYSTEM menu, scroll UP or DOWN to highlight the LOG SETUP
menu.
3) Press the ENTER key to open the LOG SETUP menu, then scroll UP or DOWN
to highlight the RX MODE menu.
4) Press the ENTER key to open the RX MODE menu. BIND will be displayed and
[ENTER] will be highlighted.
5) Turn your other transmitter ON, then navigate to that transmitter's BIND
menu and highlight the [ENTER] option. For more information, refer to your
transmitter's User's Guide.
6) Press the ENTER key on the
M12S Super to begin the
Binding process. SEARCH will
flash slowly.
7) Press the ENTER key on your
other transmitter. RECEIVE
will flash fast on the M12S
Super.
8) Press the BACK key, first on the M12S Super, then on your other transmitter, to complete the Binding process. The Bind LED
on your other transmitter should illuminate solid and both LED1 and LED2 on the M12S Super should be extinguished.
9) Press the BACK key to return to the STATUS screen, then scroll UP or DOWN to open the TELEMETRY screen. You should now
be able to view the other transmitter's Steering and Throttle Output Data on the M12S Super TELEMETRY screen. In addition,
if your other transmitter supports Telemetry, you should be able to view that transmitter's Telemetry Data on the M12S Super
TELEMETRY screen as well.
64
Telemetry System with Sanwa Synchronized Link Support
SYSTEM
Advertisement
Table of Contents
