Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
MODEL MENU { SELECT, NAME, COPY, CLEAR, SORT AND TEMPLATE }
Entering a Model Name, Continued:
3) Press the ENTER key to open the NAME menu. The underscore will be positioned under the first character in the Model Name.
4) Press the SELECT switch RIGHT or LEFT or scroll UP or DOWN to move the
underscore under the character you want to change, then press the ENTER key.
5) Scroll UP or DOWN and press the SELECT switch RIGHT or LEFT to highlight a character in the Character List. Press the
ENTER key to select the highlighted character. That character will be displayed in the Model Name and the underscore will
advance to the next space. If at any time you can't move the underscore, press the BACK key to re-gain control of the
underscore.
6) Repeat step 5 to enter the rest of the characters. Up to 14 characters can be
entered. If desired, press the BACK key to re-gain control of the underscore,
then use the SELECT switch or scroll UP or DOWN to move the underscore
RIGHT or LEFT. To add a space (or spaces) in your Model Name, use the
character.
Deleting a Character:
1) Press the SELECT switch RIGHT or LEFT or scroll UP or DOWN to move the underscore under the character in your Model
Name you want to delete.
2) Press the ENTER key, then scroll UP or DOWN and press the SELECT switch RIGHT or LEFT to highlight the
the Character List. Press the ENTER key. The character in your Model Name will be deleted and the underscore will advance
to the next space.
Deleting a Model Name:
1) Press the SELECT switch RIGHT or LEFT or scroll UP or DOWN to move the underscore under the first character in your
Model Name.
2) Press the ENTER key, then scroll UP or DOWN and press the SELECT switch RIGHT or LEFT to highlight the
Character List. Continuously press the ENTER key to delete each character in your Model Name.
Model Copy
The Model Copy function allows you to copy the Programming Data FROM the currently TO another model. For example, if you
have two models that are similar, you can copy the Programming Data from the first model to the second model to use as a base
to start fine-tuning the programming for the second model. Make sure that prior to using the Model Copy function, you first select
the desired model you want to copy Programming Data FROM, using the Model Select function.
Copying Model Programming Data:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the MODEL
menu.
2) Press the ENTER key to open the MODEL menu, then scroll UP or DOWN to
highlight the COPY menu.
30
Telemetry System with Sanwa Synchronized Link Support
SYSTEM
character in
character in the
Advertisement
Table of Contents
