Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
TELEMETRY SCREEN OVERVIEW
The TELEMETRY screen displays Telemetry Data, such as RPM or Speed, Temperature, Receiver Voltage and more.
For information about making Telemetry option changes that effect how and what Telemetry Data is displayed on the various
TELEMETRY pages, see the LOG SETUP Menu section on pages 56 through 66.
Telemetry integration requires the use of an Airtronics or Sanwa 2.4GHz FH4T Telemetry-capable surface receiver or
SSL-compatible ESC (e.g. Super Vortex series ESC). Steering and Throttle Output and Lap Times can still be viewed when
used with non-Telemetry capable receivers.
From the STATUS screen, use the Push-Button Rotary Dial to scroll UP or DOWN to display the TELEMETRY screen. Remember,
BASIC Mode must be turned OFF.
Steering Output Display
Receiver Voltage Display
Lap Time Display
Temperature 1 Display
Use the SELECT switch to switch between ALL and LAP, ST, TH, RPM, VOLT, TMP1* and TMP2* pages. These pages display more
detailed Telemetry Data and allow you to review Telemetry Data and Save the current Telemetry Data Log to your PC for archiving
or viewing at a later time.
*Default name and function. Can be renamed if using different Telemetry accessories (available separately). For more information,
see your local Airtronics or Sanwa retailer.
The layout of the information displayed on the ST, TH, RPM, VOLT, TMP1 and TMP2 pages is similar, so only the STEERING
page is shown in this section. For information about viewing Lap Times, see the Viewing Lap Times section on page 84.
Status Indicator
Numerical Telemetry Data
Elapsed Time
TELEMETRY Screen Overview Diagram Descriptions:
Cursor Indicator: Indicates the current position of the Cursor when reviewing Telemetry Data. The Cursor Indicator will only be
displayed when in VIEW Mode.
Data Point Scale: Indicates the time in Seconds between recorded Telemetry Data Points. This value is fixed at 0.5 seconds.
Direction/Max/Min Indicators: Indicates Control Movement Direction or Programmed Maximum and Minimum Telemetry Data
values, depending on the current TELEMETRY page being displayed.
Elapsed Time: Displays the current position in Time of the Cursor Indicator within the current Telemetry Data Log.
Lap Indicator: Indicates the position along the Telemetry Data Stream that a Lap Time was counted.
Lap Number: Displays the current Lap Number.
Lap Time: Displays the Lap Time of the currently Selected Lap Number.
Lap Time Display: Displays the current Lap Time in Minutes, Seconds and 1/100th of a Second, and the current Lap Number.
Telemetry System with Sanwa Synchronized Link Support
Throttle Output Display
Temperature 2 Display
Telemetry Data Graph
Page Indicator
Lap Number
Lap Time
Cursor Indicator
Lap Indicator
GENERAL
RPM/Speed Gauge
RPM/Speed Display
Direction/Max/Min Indicators
Data Point Scale
T
21
Advertisement
Table of Contents
