Model Clear; Clearing Model Programming Data - Sanwa M12S SUPER User Manual

M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
MODEL MENU { SELECT, NAME, COPY, CLEAR, SORT AND TEMPLATE }
Copying Model Programming Data, Continued:
3) Press the ENTER key to open the COPY menu. The currently will be displayed
in brackets above the Model Copy List.
4) Scroll UP or DOWN within the Model Copy List to highlight the model you
would like to copy the current Model's Programming Data TO.
5) Press the ENTER key. MODEL COPY OK? NO/YES will be displayed. Scroll UP
or DOWN to highlight YES, then press the ENTER key.
All Model-specific Programming Data, including the Model Name will
be copied to the highlighted model. If you want to go back and change
models or you don't want to Copy the Programming Data for any reason,
choose NO or press the BACK key prior to EXECUTING.
6) EXECUTED will be displayed and the model you just copied Programming
Data TO will be highlighted in brackets and the top of the Model Copy List.

Model Clear

The Model Clear function allows you to reset model-specific Programming Data for the currently Selected Model back to the
Factory Default settings. Make sure that prior to using the Model Clear function, you first Select and load the desired model you
want to clear the Programming Data for, using the Model Select function.
When the Model Clear function is EXECUTED, all custom Programming Data for the currently Selected Model will be reset
to the Factory Default settings!

Clearing Model Programming Data:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the MODEL
menu.
2) Press the ENTER key to open the MODEL menu, then scroll UP or DOWN to
highlight the CLEAR menu. The currently Selected Model will be displayed.
3) Press the ENTER key. MODEL CLEAR OK? NO/YES will be displayed. Scroll
UP or DOWN to highlight YES, then press the ENTER key. EXECUTED will be
displayed and all Programming Data for the currently Selected Model will be
reset to the Factory Default settings.
If you want to go back and change models or you don't want to Clear
the Programming Data for any reason, choose NO or press the BACK
key prior to EXECUTING.
Telemetry System with Sanwa Synchronized Link Support
T
SYSTEM
31