Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
PROGRAMMING KEYS OVERVIEW AND FUNCTIONS
Navigating through the various Display Screens, Programming Menus and changing Programming Values is accomplished
using the ENTER key (Push-Button Rotary Dial), the SELECT switch and the BACK key.
PRO TIP: While navigating Programming Menus and changing Programming Values, keep the following in mind: to choose
a menu from the STATUS screen, use the SELECT switch. To open a menu, press the ENTER key. To choose an option
to program, scroll UP or DOWN to highlight the desired option, then press the ENTER key. The highlighted option will flash,
indicating the Programming Value can be changed. Once you've changed the Programming Value, press the ENTER key again
or press the BACK key and the highlighted option will stop flashing, indicating you can scroll UP or DOWN to highlight another
programming option. To reset a programming option to its default value, highlight the option and press the HOLD the ENTER key.
PROGRAMMING KEY
DISPLAY SCREENS OVERVIEW
In the default configuration, when you turn the M12S Super ON, the transmitter will start-up and display the BOOT screen
temporarily, then display the STATUS screen.
BOOT Screen: The BOOT screen is displayed when the transmitter is turned ON. The BOOT screen can be disabled. For more
information, see the INFORMATION Menu section on pages 71 and 72.
STATUS Screen: The STATUS screen is displayed after the BOOT screen and displays important information about the
transmitter. It's also the base from which you access other Programming Menus. For more detailed information, see the STATUS
Screen Overview section on the next two pages.
Telemetry System with Sanwa Synchronized Link Support
NAME
Push-Button
Rotary Dial
(Scroll UP/DOWN)
SELECT Switch
Push-Button Rotary Dial
(Push ENTER)
BACK Key
BOOT Screen
FUNCTION
Scrolls between STATUS, ASSIGN and TELEMETRY screens*
Scrolls the Programming Cursor RIGHT or UP and LEFT or
DOWN. Increases or Decreases Programming Values.
Used to Select various menus*. In addition, the SELECT switch's
function will vary depending on the menu chosen and will be
indicated in the menu's Message Display Window.
Opens the Selected menu or programming option. Press and
HOLD to reset the Selected programming option to its default
value.
Returns to the previous menu. Repeatedly press to return to the
STATUS screen.
STATUS Screen ( BASIC Mode OFF )
GENERAL
*BASIC Mode Must Be Turned OFF.
GENERAL
17
T
Advertisement
Table of Contents
