Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
MODEL MENU { SELECT, NAME, COPY, CLEAR, SORT AND TEMPLATE }
Model Sort
The Model Sort function allows you to change how your models are displayed in the Model Select List by allowing you to swap
the currently Selected Model with other models. For example, you might want to Sort your models so that your most frequently
used models are at the top of the Model Select List, or you might want to Sort your
models by type, such as crawlers, on-road, etc.
Sorting Models:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the MODEL
menu.
2) Press the ENTER key to open the MODEL menu, then scroll UP or DOWN to
highlight the SORT menu.
3) Press the ENTER key to open the SORT menu. The currently Selected Model
will be displayed in brackets above the Model Sort List and the first model in
the Model Sort List will be highlighted.
4) Scroll UP or DOWN within the Model Sort List to highlight the model you
would like to swap the currently Selected Model with and move to the top
of the Model Sort List. For example, the currently Selected Model is M01.
Highlight M02 to swap M01 with M02 and move it to the top of Model Sort List.
5) Press the ENTER key. MODEL SORT OK? NO/YES will be displayed. Scroll UP
or DOWN to highlight YES, then press the ENTER key.
If you want to go back and choose a different model or you don't want
to Sort the for any reason, choose NO or press the BACK key prior to
EXECUTING.
6) EXECUTED will be displayed and the model you highlighted (i.e. M02) will
be swapped with the currently Selected Model and moved to the top of the
Model Sort List.
7) Repeat steps 4 through 6 to continue Sorting Models by swapping with the
currently Selected Model. To swap with a different model, you must Select
that desired model using the Model Select function first. For more information,
see the Model Select section on pages 28 and 29.
Model Template
The Model Template function allows you to store up to five downloaded Pre-Programmed Model Templates that allow you
to more easily set up the transmitter for models that require more time-consuming and complicated programming. Two Model
Templates are factory-programmed for use with the Super Vortex ZERO and Super Vortex Type-D ESCs to get you started. If
your model uses one of these ESC's, you can Copy the desired Model Template to the Selected Model and the Auxiliary Type and
CODE functions will already be programmed for you. Model Templates can be Saved and Loaded using the PC LINK function.
Selecting a Model:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the MODEL menu.
2) Using the Model Select function, select the model you would like to copy Template Programming Data to. For more
information, see the Model Select section on pages 28 and 29.
32
Telemetry System with Sanwa Synchronized Link Support
SYSTEM
Advertisement
Table of Contents
