Custom Menu Overview; Changing The Code Function Names; Changing The Code Auxiliary Values - Sanwa M12S SUPER User Manual

2.4ghz fh4t

Table of Contents

M12S SUPER

2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE

CODEAX1 AND CODEAX2 MENU { CODE AUXILIARY 1 AND CODE AUXILIARY 2 }

This section covers both the Code Auxiliary 1 and Code Auxiliary 2 menus, since programming each of them is exactly the

same. Choose either the CODEAX1 or the CODEAX2 menu depending on which of the two Code Auxiliary functions you

want to program.

Changing the Code Function Names:

1) From within the RACING menu, scroll UP or DOWN to highlight either the

CODEAX1 or the CODEAX2 menu depending on which Code Auxiliary

functions you want to program. In this section, we show naming and

programming Code Auxiliary 1.

2) Press the ENTER key to open the CODEAX1 menu. CODE01 > 0 will be

highlighted.

3) Scroll UP or DOWN to highlight the Code function you want to rename.

4) Using the same methods

that you used to change the

Model Name, change the

Code Name as desired. For

example, DRFEEL. For more

information, see the Model

Name section on pages 29

and 30.

Changing the Code Auxiliary Values:

1) From within the CODEAX1 menu, scroll UP or DOWN to highlight the desired

Code Auxiliary value you would like to change.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Code

Auxiliary value. Refer the User's Guide of the SSL-compatible product you're

controlling to know what Code Auxiliary values to use.

3) Press the ENTER key, then repeat steps 1 and 2 to change any other desired Code Auxiliary values.

CODE01 through CODE10 setting range is -100 to 100. The default setting for all Code Auxiliary functions is 0.

Depending on the Auxiliary 1 or Auxiliary 2 Operating Mode chosen, you can program either 5 CODE functions per Auxiliary

channel or up to 10 CODE functions per Auxiliary channel. For more information, see the AUX TYPE Menu section

on page 50.