Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
LAP TIMER MENU { VIEW LAP TIMES AND CHOOSE LAP TIMER OPTIONS }
Setting the Goal Time:
When the Lap Timer is counting Up, a long audible Tone will sound when the Goal Time is reached. For example, if you set the
Goal Time value for 5 Minutes, a long audible Tone will sound when the Lap Timer reaches 5 minutes.
When the Goal Time is reached the Lap Timer will continue counting Up, but you will no longer be able to continue counting
Lap Times. The next time you press the Lap Timer Switch, the Lap Timer will Stop.
1) From within the SETUP menu, scroll UP or DOWN to highlight the LAP TIMER
menu.
2) Press the ENTER key to open the LAP TIMER menu. GOAL TIME > 60'00 will be
highlighted.
3) Press the ENTER key, then scroll UP or DOWN to choose the desired Goal
Time value in Minutes : Seconds.
GOAL TIME setting range is 10 Seconds to 60 Minutes (00'10 to 60'00) and is
adjustable in 10 second intervals. The default setting is 60 Minutes.
Setting the Pre-Alarm Time:
The Pre-Alarm function is used to alert you that your Goal Time is approaching. You can program the Pre-Alarm to sound once
every second the desired number of seconds prior to reaching your Goal Time. For example, if the Pre-Alarm value is set to
5 Seconds, a short audible Tone will sound every second, 5 seconds prior to reaching your Goal Time. If desired, the Pre-Alarm
value can be set to OFF to turn the Pre-Alarm OFF.
1) From within the LAP TIMER menu, scroll UP or DOWN to highlight PRE
ALARM > 5sec.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired Pre-Alarm
value in Seconds.
PRE ALARM setting range is OFF and 1 to 20 Seconds. The default setting
is 5 Seconds.
Choosing the Optional Throttle Trigger Start:
The Throttle Trigger can be used to Start the Lap Timer after the Lap Timer as been placed in Standby. This is much more convenient
and accurate than pressing the Lap Timer Switch again to Start the Lap Timer when you're trying to start your race.
1) From within the LAP TIMER menu, scroll UP or DOWN to highlight START
TRIGGER > OFF.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired Start
Trigger value, either ON or OFF.
START TRIGGER setting range is OFF and ON. The default setting is OFF.
Starting the Lap Timer and Counting Lap Times:
1) In the default configuration, the Lap Timer Switch (Push-Button Switch Sw3) controls the Lap Timer. Press and HOLD the Lap
Timer Switch for 3 seconds. An audible Double-Tone will sound and LAP [ STANDBY ] will be displayed momentarily in a pop-up
window, indicating the Lap Timer is in Standby. To start the Lap Timer, press the Lap Timer Switch a second time or pull the Throttle
Trigger if you've Enabled the Start Trigger function. An audible Double-Tone will sound and the Lap Timer will start counting Up.
2) Press the Lap Timer Switch a second time to store the first Lap Time and begin counting a second Lap Time. Each time you
press the Lap Timer Switch, an audible Tone sounds, the previous Lap Time is stored, a new Lap Time begins and the current
Lap Time is displayed momentarily in a pop-up window.
Telemetry System with Sanwa Synchronized Link Support
T
SETUP
83
Advertisement
Table of Contents
