Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
4WS MIX MENU { FOUR WHEEL STEERING MIXING }
The Four Wheel Steering Mixing function provides you with two Steering channels. It allows you to control either the Front or Rear
Steering independently or Mix the Front and Rear Steering to have Parallel Four Wheel Steering (Crab) or Tandem Four Wheel
Steering. Use one of the five Trim Switches or the Auxiliary Dial to cycle through the different Four Wheel Steering options while
you're driving. The Four Wheel Steering Mixing function can be toggled OFF and ON while you're driving by Assigning 4WS to
one of the three Push-Button Switches.
When using the Four Wheel Steering function, it's important to adjust the F/ST channel and R/ST channel Sub-Trim
values to center both Steering servos when the Steering Wheel is centered. This will ensure that your model tracks
straight. In addition, you are able to adjust many functions, such as Exponential, Servo Speed and much more for each
Steering channel independently. This allows for the optimum Four Wheel Steering Mixing setup.
The Four Wheel Steering Mixing function is available only when either Car Type VIII or Car Type X is selected.
Choosing the Four Wheel Steering Mixing Options:
1) From within the SETUP menu, scroll UP or DOWN to highlight the 4WS MIX
menu. In the example shown in this section, we've selected Car Type X in the
CAR TYPE menu.
2) Press the ENTER key to open the 4WS MIX menu. The last Four Wheel Steering
Mixing option selected will be highlighted.
3) Press the ENTER key, then scroll UP or DOWN to highlight the Four Wheel
Steering Mixing option you would like to use.
4) Press the ENTER key to Activate that option.
Use the Servo Monitor at the bottom of the 4WS MIXING screen to view
Steering channel output.
The following Four Wheel Steering Mixing options are available:
FRONT Wheel Steering - When Active, only the Front Steering will
operate.
REAR Wheel Steering - When Active, only the Rear Steering will operate.
NORMAL (Parallel/Crab) Four Wheel Steering - When Active, both the
Front and Rear Steering will operate in Parallel.
REVERSE (Tandem) Four Wheel Steering - When Active, both the Front
and Rear Steering will operate in Tandem.
If the Steering servos do not operate as described above, you can use the Servo Reversing function to change the
direction that each servo operates. For more information, see the REV Menu section on pages 75 and 76.
Telemetry System with Sanwa Synchronized Link Support
T
SETUP
79
Advertisement
Table of Contents
