Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
MENUS OVERVIEW
Each of the menus described in the previous section all share the same basic layout as illustrated below. Use this information to
familiarize yourself with the layout and the information presented.
Model Number
Next Programming Menus
Current Programming Menu
Next Programming Menus
Current Main Menu
Current Main Menu: Displays the currently Active main menu, either BASIC, SYSTEM, SETUP, RACING or CUSTOM.
Current Programming Menu: Displays the currently Active Programming Menu.
Menu Header: Displays the name of the currently Active Programming Menu. In some cases, programming options may also be
found within the Menu Header.
Menu Programming Display: Displays all programming information pertinent to the currently Active Programming Menu.
Message Display: Displays different Programming Key functions based on the currently Active Programming Menu. For more
information, see the illustrations and descriptions below.
Model Number: Displays the number of the currently selected Model.
Next Programming Menus: Displays the next two Programming Menus within the current main menu.
Racing Mode Indicator: Indicates which Racing Mode (R1 through R5) is Active or Inhibited.
System Indicators: Indicates current transmitter status information as described in the Display Screens Overview section on
pages 17 through 19.
The function of the SELECT switch and the ENTER key will vary depending on the specific Programming Menu displayed.
20
Telemetry System with Sanwa Synchronized Link Support
Racing Mode Indicator
In This Menu Style:
The SELECT switch Saves or Removes the current Programming Menu from the
CUSTOM menu.
The ENTER key opens the highlighted Programming Menu. Scroll UP and DOWN to
choose different Programming Menus.
In This Menu Style:
The ENTER key opens a Sub-Menu. Scroll UP and DOWN to choose different
Sub-Menus.
In This Menu Style:
The SELECT switch scrolls RIGHT or LEFT to Select different channels.
Scroll UP and DOWN to choose the desired function Programming Value, then
press the ENTER key change the Programming Value.
System Indicators
GENERAL
Message Display
Menu Header
Menu Programming Display
Advertisement
Table of Contents
