Using The Servo Monitor; Assign Menu (Switch, Dial, Lever And Telemetry Function Assignments); Push-Button Switch Function Assignments; Changing The Push-Button Switch Function Assignments - Sanwa M12S SUPER User Manual

2.4ghz fh4t

Table of Contents

M12S SUPER

2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE

SERVO MENU { SERVO MONITOR }

Using the Servo Monitor:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the SERVO

menu.

2) Press the ENTER key to open and view the full screen Servo Monitor. The hash

marks represent the current channel output positions.

Depending on the current servo reversing settings, the hash mark may

not move the same direction as the transmitter controls. This is normal.

ASSIGN MENU { SWITCH, DIAL, LEVER AND TELEMETRY FUNCTION ASSIGNMENTS }

The ASSIGN menu allows you to Assign different functions to each of the three Push-Button Switches, the five Trim Switches, the

Auxiliary Dial and the Auxiliary Lever. Each of the three Push-Button Switches can have up to two functions Assigned to it and the

ON/OFF behavior can be changed. The Direction of Travel and the Trim Resolution of the five Trim Switches and the Auxiliary

Dial can also be changed. In addition, a Telemetry Assign function allows you to connect and remotely use an external device

that features a push-button switch, a trim switch or dial, or a lever to control specific transmitter functions, such as the Lap Timer,

Throttle Hold and much more. This allows a driver helper or a pit crew member to control transmitter functions, allowing you to

concentrate more on driving.

Switch Trm4

Switch Sw1

Auxiliary Lever

Switch Trm5

Switch Sw3

The Switch Assign function allows you to Assign various functions to the three Push-Button Switches Sw1, Sw2 and Sw3. This

allows you to use the Push-Button Switches to turn functions ON and OFF while you're driving. Up to two different functions can

be Assigned to each switch and the ON and OFF behavior of each switch can be changed to either PUSH or TOGGLE to suit the

programmed function and your specific requirements.

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the ASSIGN

menu.

Telemetry System with Sanwa Synchronized Link Support

Switch Trm1

Switch Trm2

Switch Trm3

SYSTEM

Auxiliary Dial

Switch Sw2

Table of Contents