Vibrator Menu (Vibration Alerts And Alarms); Changing The Audible Tones; Changing The Volume - Sanwa M12S SUPER User Manual

2.4ghz fh4t

Table of Contents

M12S SUPER

2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE

BUZZER MENU { AUDIBLE KEY TONES AND ALARMS }

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the BUZZER

menu.

2) Press the ENTER key to open the BUZZER menu. CLICK [TONE1] > 1 will be

highlighted.

3) Scroll UP or DOWN to highlight the Function Tone Number you would like to

change. Refer to the table on the previous page for more information.

4) Press the ENTER key, then scroll UP or DOWN to choose the desired Tone

value for either [TONE1] and/or [TONE2]. Increasing the Tone value will

Increase the Tone of the selected function and Decreasing the Tone value will

Decrease the Tone of the selected function.

TONE1 and TONE2 setting range is 1 to 7. The default setting is 1. TONE1 changes the first half Tone and TONE2 changes

the second half Tone.

5) Press the ENTER key, then repeat steps 3 and 4 to change the Audible Tones for any other desired functions.

1) From within the BUZZER menu, Scroll UP or DOWN to highlight the Function

Volume Number you would like to change.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Volume

value. Increasing the Volume value will Increase the Volume of the selected

function and Decreasing the Volume value will Decrease the Volume of the

selected function. Choosing OFF will Mute the selected function.

VOLUME setting range is OFF and 1 to 10. The default setting is 8.

3) Press the ENTER key, then repeat steps 1 and 2 to change the Volume value for any other desired functions.

VIBRATOR MENU { VIBRATION ALERTS AND ALARMS }

The Vibrator function makes the transmitter vibrate like a cell phone to make you aware of different alerts and alarms that you

might encounter during use. For example, you can program the transmitter to vibrate when the an Interval Timer starts or stops

or when you reach a Lap Timer Goal Time. You can also program the transmitter to vibrate when the transmitter reaches the

programmed Voltage Alert value or when the transmitter is turned ON and more. In addition, you can adjust the level of vibration.

The Vibrate function is particularly useful if you've Muted any of the related audible alerts and alarms. The Vibrate function can

also be used along with the related audible alerts and alarms to provide a level of tactile feedback while you're driving.

Telemetry System with Sanwa Synchronized Link Support

SYSTEM

Table of Contents