Saving Model Programming Data - Sanwa M12S SUPER User Manual

M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
PC LINK { SAVE TRANSMITTER DATA AND UPDATE FIRMWARE }
Saving the Telemetry Data Log, Continued:
2) Press the ENTER key to open the PC LINK menu, then scroll UP or DOWN to
highlight the SAVE LOG menu.
3) With the PC LINK Manager 3 software running and the transmitter connected,
press the LOG SAVE TX > PC button on the PC LINK Manager 3 software.
4) Navigate to the folder you would like to save the Telemetry Data Log to, then type a name for the file and press the Save button.
Do not press the Start button on the PC LINK Manager 3 software yet!
5) Press the ENTER key. PC RECEIVE LOG SAVE OK? NO/YES will be displayed.
6) Scroll UP or DOWN to highlight YES, then press the ENTER key. PC START will
be displayed.
If you want to go back or if you don't want to Save the Telemetry Data
Log for any reason, choose NO or press the BACK key.
7) Press the Start button on the PC LINK Manager 3 software and allow the Data Transfer to complete. Once completed, EXECUTED
will be displayed momentarily on the M12S Super and The Operation Was Completed will be displayed on your PC.

Saving Model Programming Data

The Save Model function allows you to Save the currently selected model's Programming Data to your PC, either for archiving or
for sharing with other M12S Super transmitter users. For example, you can Save your current model's Programming Data to your
PC, then share the file with a friend or fellow driver. They can then upload that Programming Data to their M12S Super using the
Load Model function.
Only the currently selected model's Programming Data will be Saved. To Save the Programming Data for a different
model, you must select that model first, using Model Select function. For more information, see the Model Select section
on pages 28 and 29.
Saving Model Programming Data:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the PC LINK
menu.
2) Press the ENTER key to open the PC LINK menu, then scroll UP or DOWN to
highlight the SAVE MDL menu.
3) With the PC LINK Manager 3 software running and the transmitter connected,
press the MODEL SAVE TX > PC button on the PC LINK Manager 3 software.
4) Navigate to the folder you would like to save the Model Programming Data to,
then type a name for the file and press the Save button. Do not press the Start
button on the PC LINK Manager 3 software yet!
5) Press the ENTER key. PC RECEIVE MODEL SAVE OK? NO/YES will be displayed.
6) Scroll UP or DOWN to highlight YES, then press the ENTER key. PC START will
be displayed.
If you want to go back or if you don't want to Save the Model Programming
Data for any reason, choose NO or press the BACK key.
7) Press the Start button on the PC LINK Manager 3 software and allow the Data Transfer to complete. Once completed, EXECUTED
will be displayed momentarily on the M12S Super and The Operation Was Completed will be displayed on your PC.
68
Telemetry System with Sanwa Synchronized Link Support
SYSTEM