Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
DISPLAY SCREENS OVERVIEW
Use the information in this section to familiarize yourself with the layout and different indicators and displays that comprise the
STATUS screen. The STATUS screen displays all pertinent information, such as the Model Name, Modulation Type, Timer,
Voltage and much more. The STATUS screen will always be displayed after the BOOT screen unless you change that option in
the SYSTEM > BOOT menu. For more information, see the INFORMATION Menu section on pages 71 and 72.
STATUS Screen Overview Diagram:
Trim Display
Car Type Indicator
Racing Mode Indicator
From the STATUS screen, use the Push-Button Rotary Dial to scroll UP or DOWN to display the ASSIGN and TELEMETRY
screens. To return to the STATUS screen, either scroll to it or press the BACK key.
BASIC Mode must be turned OFF to view the ASSIGN and TELEMETRY screens. For information about turning BASIC
Mode ON and OFF, see the INFORMATION Menu section on pages 71 and 72.
ASSIGN Screen: The ASSIGN screen displays the functions that are currently Assigned to the Push-Button Switches, the Trim
Switches, the Auxiliary Dial and the Auxiliary Lever, all in one convenient location.
TELEMETRY Screen: The TELEMETRY screen displays Telemetry Data, such as RPM or Speed, Temperature, Receiver Voltage
and more. Use the SELECT switch to switch between ALL and LAP, ST, TH, RPM, VOLT, TMP1* and TMP2* pages.
*Default name and function. Can be renamed if using different Telemetry accessories (available separately). For more information,
see your local Airtronics or Sanwa retailer.
Telemetry integration requires the use of an Airtronics or Sanwa 2.4GHz FH4T Telemetry-capable surface receiver or
SSL-compatible ESC (e.g. Super Vortex series ESC). Steering and Throttle Output and Lap Times can still be viewed when
used with non-Telemetry capable receivers.
STATUS Screen Overview Diagram Descriptions:
Audio Indicator: Indicates whether Audible Key Tones and Transmitter Alarms are Muted or not.
Car Type Indicator: Indicates the current Car Type selected.
Dual Rate Display: Displays the current Dual Rate percentage value of channels that Dual Rate can be programmed for. Channels
displayed will vary based on the currently selected Car Type.
Mode Display: Displays any special Programming Modes that are Active, such as Throttle Offset or Anti-Lock Braking.
Model Name: Displays the Name of the currently selected Model.
Model Number: Displays the number of the currently selected Model.
Modulation Type Indicator: Indicates the current Modulation Type that the transmitter is set to.
18
Telemetry System with Sanwa Synchronized Link Support
Modulation Type Indicator
Model Number Model Name
Mode Display
ASSIGN Screen
RF Indicator
SCROLL
TELEMETRY Screen
GENERAL
On-Time Indicator
Audio Indicator
Voltage Indicator
Telemetry Signal Indicator
Trim Display
Dual Rate Display
Advertisement
Table of Contents
