Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
BASIC MODE MENU OVERVIEW
The M12S Super features a BASIC Mode that simplifies transmitter use. The
accompanying BASIC menu contains some of the more common, general-use
Programming Menus that a user will require for basic programming. When BASIC
Mode is turned ON, not only are these various Programming Menus in one easy
place to find them, so you don't need to spend time finding them in one of the
other four menus, but it also removes the TELEMETRY and ASSIGN screens to
simplify transmitter use.
To access the various BASIC menu Programming Menus, turn the transmitter ON, then press the ENTER key to open the
BASIC menu.
Scroll UP or DOWN to highlight the desired Programming Menu, then press the ENTER key to open that menu.
The following Programming Menus are available within the BASIC menu:
MENU
SELECT
Select Your Model
BIND
Bind, Choose Modulation Type, Safety Link Number and Channel Response Mode
D/R
Adjust Steering, Throttle and Brake Dual Rates
EPA
Adjust Channel End Points to Balance Servo Travel
CURVE
Adjust Channel Exponential, Adjustable Rate Control (ARC) and Curves
SPEED
Adjust Servo Speed in the Forward and the Return to Neutral Directions
TRIM
Adjust Servo Trim, Including Auxiliary Channel Trim
SUB TRIM
Adjust Servo Centering to Center the Servo Horns
REV
Change the Direction of Servo Travel
F/S
Program Fail Safe Settings
ALB
Turn Anti-Lock Braking ON or OFF and Choose Anti-Lock Braking Options
NAME
Name Your Model
COPY
Copy Model Programming Data From One Model to Another
INFORMATION
View Firmware Version, Change Boot Screen, Turn BASIC Mode ON and OFF, and More
TURNING BASIC MODE ON AND OFF
1) Press the ENTER key to open the BASIC menu, then scroll UP or DOWN to
highlight the INFORMATION menu.
If BASIC Mode is turned OFF, press the SELECT switch to highlight the SYSTEM menu. Press the ENTER key a second
time to open the SYSTEM menu, then scroll UP or DOWN to highlight the INFORMATION menu.
2) Press the ENTER key to open the INFORMATION menu. The cursor will default
to ON TIME > XX:XX.
3) Scroll UP or DOWN to highlight BASIC > ON or BASIC > OFF.
4) Press the ENTER key, then scroll UP or DOWN to select the desired option, either ON or OFF. When ON is selected, BASIC
Mode will be turned ON and when OFF is selected, BASIC Mode will be turned OFF.
Telemetry System with Sanwa Synchronized Link Support
MENU DESCRIPTION
T
BASIC
PAGE #
PG. 28
PG. 34
PG. 89
PG. 73
PG. 90
PG. 95
PG. 89
PG. 74
PG. 75
PG. 80
PG. 96
PG. 29
PG. 30
PG. 71
BASIC
25
Advertisement
Table of Contents
