Table of Contents
Advertisement
Usage of each feature
System Menu
RACING MODE [R-MODE]
●A feature to adjust the running characteristics of your RC car by switching the Racing Mode so
that the features compatible to the Racing Mode can respond to your RC car and road conditions.
●It allows you to set two setting values of R1 and R2 individually for features that are compatible
to the Racing Mode for each Model Memory, and to change by the switches that are assigned
during operation.
●As a default, ON/OFF of R-MODE is not assigned to the switch.
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [R-MODE] with the multi-selector and determine
with the Enter operation.
3)Set the features that corresponds to the action of the
Racing Mode with the multi-selector.
Channel selection is done by the Select button.
○Setting range:
R-MODE: OFF/2
Compatible equipment: Each Feature ON/OFF
○Default :
R-MODE: INH
Compatible equipment: Each Feature OFF
○Compatible Equipment
• ST/TH: D/R, SPEED, CURVE, TRIM
• AUX: D/R, SPEED, CURVE, TRIM, AUX
4) By setting the feature of R-MODE onto the switch
and operating during running, you can switch to
the Racing Mode.
The Assignments feature allows you to add changes
to the Trim lever and the switch (P. 51, 52).
*Set according to a setting change of SUPER VORTEX,
tire wear, change of the road condition.
５５
SYSTEM
ENTER
BACK
ENTER
BACK
CHANNEL
SELECTION
RACING MODE
DISPLAY
Advertisement
Table of Contents
