Model Menu (Select, Name, Copy, Clear, Sort And Template) - Sanwa M12S SUPER User Manual

M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
TYPE MENU { CAR TYPE TEMPLATES }
Choosing a Car Type, Continued:
2) Press the ENTER key to open the TYPE menu. The cursor will default to CAR
TYPE > I.
3) Press the ENTER key, then scroll UP or DOWN to Select the desired Car Type
as shown in the table below. The TYPE Menu Programming Display shows the
Car Type (Normal or Crawler) and which servos should be plugged into what
receiver channel ports. For example, CAR TYPE > VII is a Normal Car Type that
might be used for a 1/5th scale off-road gas buggy that uses two Steering
servos and a separate second Brake servo. In this example, the Left Steering
servo should be plugged into channel 1, the Right Steering servo should be
plugged into channel 3, the Throttle/first Brake servo should be plugged into
channel 2 and the second Brake servo should be plugged into channel 4.
4) Press the ENTER key. MODEL DATA CLEAR? NO/YES will be displayed.
5) Scroll UP or DOWN to highlight YES, then press the ENTER key. EXECUTING
will be displayed and the current Model Programming Data will be reset with
the Selected Car Type options.
If you want to go back and change the Car Type or you don't want to
create the new Car Type for any reason, choose NO or press the BACK
key prior to EXECUTING.
Your particular model may not require the use of all four channels, even though each Car Type template may show
them. In this case, those channels will simply go unused.
This table shows the various channel functions based on the selected Car Type:
TYPE
TYP I
CH
CH 1 ST
CH 2 TH+BR
CH 3
AUX1
CH 4
AUX2
ST=Steering • TH=Throttle • BR=Brake • BR2=Brake 2 • R-ST=Right • L-ST=Left • R/ST or R/TH=Rear • F/ST or F/TH=Front
MODEL MENU { SELECT, NAME, COPY, CLEAR, SORT AND TEMPLATE }
The MODEL menu allows you to Select different models, Name your saved models, Copy Programming Data from one model
to another model, Clear Programming Data from one or more models and Sort your saved models into a Custom List. A Model
Template function allows you to store up to five Pre-Programmed Data Templates that allow you to more easily set up
the transmitter for models that require more time-consuming and complicated programming. Two Model Templates are
factory-programmed for use with the Super Vortex ZERO and Super Vortex Type-D ESCs to get you started.
Model Select
The Model Select function allows you to load the Programming Data for the particular model you wish to drive. The MODEL
SELECT menu displays the currently Selected Model, along with a list of available models that can be Selected. The current
Modulation Type and Car Type of each model is also displayed. Programming Data for up to 50 different models can be stored
in the transmitter's memory.
Selecting a Model:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the MODEL
menu.
28
Telemetry System with Sanwa Synchronized Link Support
TYP II TYP III TYP IV
ST ST ST
TH TH+BR TH
BR BR2 BR
AUX AUX BR2
TYP V TYP VI TYP VII
L-ST L-ST L-ST
TH+BR TH TH+BR
R-ST R-ST R-ST
AUX BR BR2
SYSTEM
TYP VIII TYP IX TYP X
F/ST ST F/ST
TH+BR F/TH+BR F/TH+BR
R/ST R/TH+BR R/ST
AUX AUX R/TH+BR
SYSTEM