Table of Contents
Advertisement
M12S SUPER
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
BIND MENU { BINDING, MODULATION TYPE, SAFETY LINK AND RESPONSE MODE }
Changing the Modulation Type, Continued:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the BIND
menu.
2) Press the ENTER key to open the BIND menu. MODULATION > FH4T will be
highlighted.
3) Press the ENTER key, then scroll UP or DOWN to select the desired Modulation
Type.
4) Press the ENTER key. SET TO FH3? (or the Modulation Type you selected)
NO/YES will be displayed. Scroll UP or DOWN to highlight YES, then press the
ENTER key.
If you want to go back and change the Modulation Type or if you don't
want to change the Modulation Type for any reason, choose NO or
press the BACK key.
Turning the Telemetry Function ON and OFF:
1) From within the BIND menu, scroll down to highlight TELEMETRY > OFF.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired Telemetry
value, either ON or OFF.
TELEMETRY setting range is ON or OFF. The default setting is OFF.
Changing the Safety Link Number:
The Safety Link function is used to program a unique code to each receiver/model pair, preventing the transmitter from controlling
a model that it's not currently programmed for. This helps prevent a runaway model should you accidentally choose the wrong
Programming Data for the intended model.
The Safety Link Number should be chosen prior to Binding the transmitter and receiver pair. To make it easier to keep track
of what Safety Link Number goes to what model, we suggest making the Safety Link Number the same as the Model Number.
1) From within the BIND menu, scroll down to highlight SAFETY LINK > 01.
2) Press the ENTER key, then scroll UP or DOWN to highlight the desired Safety
Link Number.
SAFETY LINK setting range is 01 to 50. The default setting is 01.
3) Press the ENTER key. SET TO LINK No.02? (or the Safety Link Number you
selected) NO/YES will be displayed. Scroll UP or DOWN to highlight YES, then
press the ENTER key.
If you want to go back and change the Safety Link Number or if you don't
want to change the Safety Link Number for any reason, choose NO or
press the BACK key.
Telemetry System with Sanwa Synchronized Link Support
T
SYSTEM
35
Advertisement
Table of Contents
