4-Wheel Steering; Motor On Axle [Moa] (Front-Rear Wheel Separate Drive) - Sanwa MT-44 Manual

4-Wheel Steering

●With the operation of assigned Trim or Switch, control the motion of the 4 Wheel Steering.
1) Select [AUX] with the multi-selector and define with the Enter operation.
2) Setting Operating Mode
Set the Operating Mode of 4WS with the multi-selector.
Set the Operating Mode according to the usage.
* When using during operation, assign the feature of the
Operating Mode to Trim or the switch.
Steering the Motion Image
F-ST
<L Side Operation>
REV
<L Side Operation>
NOR
<L Side Operation>
R-ST
<L Side Operation>

Motor On Axle [MOA] (Front-Rear Wheel Separate Drive)

●By setting Motor On Axle (MOA], you can adjust the drive ratio of front and rear wheels of a front-rear dual
motor car.
1) Select [AUX] with the multi-selector and define with the Enter
operation.
2) Setting Operating Mode
Set the Operating Mode of MOA with the multi-selector.
*Adjust Step setting to change the drive distribution of front- rear
with [MODE] of [AUX TYPE] of [SYSTEM].
*When using, assign the features to Dial or Trim or operate with
the multi-selector.
*Connect the speed controller for controlling the rear motor to
the channel (AUX1/AUX2) that is set to MOA.
MOA Motion Image
Front Drive
Rear Drive
By changing the ratio, you can adjust the gear ratio of front-rear.
<Neutral> <R Side Operation>
<Neutral> <R Side Operation>
<Neutral> <R Side Operation>
<Neutral> <R Side Operation>
Front Drive
Rear Drive
ENTER
AUX
ENTER
Front Drive
Rear Drive
Front-rear drive ratio
AUX
BACK
Servo Motor
Switching the Operation Mode
BACK
Servo Motor
３４