MT-44 has a feature of Short Cut Menu that is launched as the user performs key operation
when operating the power switch.
If you turn the power switch on while pressing the Back Button, it becomes the Direct Model
Select and if you turn the power switch on while doing Enter operation, the Quick Setup
feature launches.
Direct Model Select is a feature for quickly selecting a model to run and Quick Setup is a
feature for various setup with easy operation when setting up a new RC car.
Quick Setup feature is set in the following order using the Enter operation after launching.
Selecting Model
Selecting Type
→
Response Mode
BIND
→
Direct Model Select < DIRECT MODE >
Direct Model Select
1) Turn the power switch on while pressing the Back button.
Holding
Holding
⇒
Push
2) Selecting Model
Select a Model you wish to call with Multi-Selector.
Selection range: M01 ~ M20
3) Move the cursor to the Model you wish to call and
do Enter operation. A message is displayed on the
screen. Select a Model following the display.
About Short Cut Menu
Initializing Model
→
Setting Base
→
Power Switch
ON
Selecting RF Modes
→
MODEL Selection Screen
①
ENTER
Confirmation Screen
②
NO →
Back to
①
YES→ Change Model and move to the top.
Selecting
→
RF MODE display
BACK
Model to be changed
to is displayed.
16