Table of Contents
Advertisement
Usage of each feature
SYSTEM MENU
LCD
●You can set LCD (Liquid Crystal) contrast (intensity), brightness and lighting mode (lighting time) of Back
Light.
1)Select [SYSTEM] with the multi-selector and determine with the Enter
operation.
2)Select [LCD] with the multi-selector and determine with the Enter
operation.
3)Set LCD (Liquid Crystal) contrast (intensity), brightness and
lighting mode (lighting time) of Back Light.
*In some contrast, you may not see screen display.
○ Setting Items: CONTRAST (Intensity of Liquid Crystal)
BRIGHT (Brightness of Liquid Crystal)
LIGHTS-MODE (Backlight Lighting Mode)
LIGHT-TIME (Backlight Lighting Time)
○ Setting range: CONTRAST：0～30
BRIGHT：0～10
LIGHT-MODE：OFF/KEY-ON/ALWAYS
LIGHT-TIME：1～30sec
○Default :
CONTRAST：10
BRIGHT：5
LIGHT-MODE：KEY-ON
LIGHT-TIME：10sec
LED
● A feature to adjust the operating mode and brightness of the function LED installed on the transmitter body.
1)Select [SYSTEM] with the multi-selector and determine with
the Enter operation.
2)Select [LED] with the multi-selector and determine with
the Enter operation.
3)Set the operating mode and brightness of the Function LED.
○ Setting Items MODE (Operating Mode)
BRIGHT (Brightness of LED)
○Setting Range MODE：ALWAYS/WAVE/OFF
BRIGHT：0～5
○Default
BRIGHT：5
Function LED
５７
*BRIGHT is only for setting ALWAYS
MODE：WAVE
Function LED
Function LED
SYSTEM
ENTER
BACK
ENTER
BACK
Advertisement
Table of Contents
