Table of Contents
Advertisement
●About copying from a micro SD card
When performing Model Copy, the main body
memory and a micro SD card can select
designation of the copy source and the copy
destination. When selecting a Model on the copy
destination selection screen, you can select with
the Select button operation.
1)When a model is selected, designation of the copy
source and the copy destination other than the main
body memory can also be selected.It is switched by the
operation of the select button.
・MEMORY (Main Body Memory): 20 memory
・SD CARD (Micro SD Card): 250 memory
・SD EXP. (Micro SD EXP.): 20 memory
*SD EXP. copies data like the template data.
Download the template data from our HP to use.
[MODEL CLEAR]
●A feature to clear (initialize) the setting data of Models.
1)Select [MODEL] with the multi-selector and determine
with the Enter operation.
2)Setting Model Clear [MODEL CLEAR]
Select [MODEL CLEAR] with the multi-selector and
determine with the Enter operation.
3)Select Model Data to perform Model Clear.
You can also select the main body memory and Model
Data in the micro SD card by operating the Select button.
4)When Enter is being operated, a message is displayed
on the screen. Follow the display to operate and complete
Model Clear.
●About the Model Clear Mode
・FULL
All settings in the Model Data will be cleared.
・SYSTEM
Select in the contents of SYSTEM of Model Data
and clearing
・MODEL
Setting within Model Data, TH Function
Clearing only the setting value of AUX
Select for your usage.
Enter Operation
Confirmation
Screen
Clearing in
progress
After Rotation Reduction is
displayed Return to <MODEL>
screen
MEMORY
SD CARD
SD EXP.
ENTER
BACK
ENTER
BACK
Return to MODEL screen
Start Clearing
Go to 2
４８
Advertisement
Table of Contents
