Work Offsets: Translation, Rotation; Work Offsets: Scale And Mirror - Siemens SINUMERIK 840D Operator's Manual

09.01
3.7

Work offsets: Translation, rotation

Display and input
3.8

Work offsets: Scale and mirror

Display and input
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
•
of the offset for geometry and special axes
•
of the rotation angle for geometry axes
•
of the selected G function for the work offset
•
Accepting the zero offset data with Save, Recall or Area
Switchover.
•
Discarding the input data with Cancel.
Fig. 3-10 Work offset: Translation, rotation
•
of the scale factor
•
of the mirror in a checkfield (select with Input)
•
of the selected G function for the zero offset
•
Accepting the zero offset data with Save, Recall or Area
Switchover.
•
Discarding the input data with Cancel.
Fig. 3-11 Work offset: Scale and mirror
Operator's Guide (BA)
3 Operation
BA/3-25