Structure Of The Documentation; Use; Target Group - Siemens SINUMERIK 840D Operator's Manual

Development Kit (EU)
1 Introduction
1.1

Structure of the documentation

1.2

Use

Target group

Objective
Dependencies
EU/1-4
The description of the functions for configuring the user interface for the
SINUMERIK OP 030 is subdivided into the following documents:
• Configuring Syntax
General description of the configuring syntax.
• Development Kit (Configuring Syntax.)
Description of the environment for the development of a customized
user interface.
• Operator's Guide
Operator's Guide for the standard operating functions.
• Screen Kit: Software update and configuration
Guide for updating the software on a SINUMERIK OP 030.
This documentation is intended for the machine tool manufacturer who
wants to design his own user interface for the OP 030.
With the aid of the OP 030 Development Kit and the associated function
description, the machine tool manufacturer is able to:
•
Create a customized user interface for the OP 030.
•
Test this user interface on a PC.
•
Load and run the customized user interface on the OP 030.
•
Create a OEM specific master disk of the modified system for his
own service assignments.
The version of the OP 030 Development Kit used must match the
version of the SINUMERIK 840D/810D.
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01