Siemens SINUMERIK 840D Operator's Manual page 174

Introduction to Configuring (PSE)
8 Examples
8.2 Add window and open using softkey
8.2.1 MMC 100/HMI
Task
Overview
Operating steps
PSE/8-46
1. Add a window to the application.
2. Press the softkey to close the window currently open and open the other
one in each case.
Menu definition block
Window definition block
Softkey object list
SOB_WIN_1
Window definition block
Softkey object list
SOB_WIN_2
•
Link an additional application source file into the MSVC Workbench
application makefile: <Project> <Edit...> menu.
•
Each list to which an application is added must be entered in the
application list directory AP_L_DIR.H with an appropriate external
reference.
•
Close the windows:
Configuration Guide: CLOSE_WINDOW
•
Open the windows:
Configuration Guide: OPEN_WINDOW
•
A window can be activated (once) via a reference in the menu definition
block. It is closed again automatically when the menu definition block is
closed.
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
M_MENU
W_WIN_1
Object list Softkey reaction list
OB_WIN_1 SRC_WIN_1
W_WIN_2
Object list Softkey reaction list
OB_WIN_2 SRC_WIN_2
© Siemens AG, 2001. All rights reserved
09.01
APP_MENU.C
APP_WIN_1.C
APP_WIN_2.C