Siemens SINUMERIK 840D Operator's Manual page 128

Screen Kit: Software Update and Configuration (IK)
2 Languages
Note
IK/2-14
2. INSTALL
The installation procedure transfers texts from the OP 030 update
directory (on your PC) to the OP 030 hardware.
Windows editors should not be used to edit the texts on account of the different
Windows/DOS character sets (ANSI/OEM). If, in spite of this, Windows editors
need to be used, a tool supplied at the same time is required to convert the text
file before the text converter is used.
Call: a2o.exe <ascii.txt>. <oem.txt>
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01
▄