Setup Of The Configuration Environment For The - Siemens SINUMERIK 840D Operator's Manual

09.01
2.3 Setup of the configuration environment for the OP 030
Procedure
Setup process
Initialization of the
MS-Visual C++
Workbench
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
•
If necessary, correct your LASTDRIVE entry in the "config.sys" to
drive "L" or higher. (LASTDRIVE=Z)
•
Edit the file "autoexec.bat":
Append the call
"call <Ziellaufwerk>:\op030\op030bin\op030set" to the end of the
file.
This sets the access paths, include paths and environment
variables for the OP 030 environment and executes
subst L: <Ziellaufwerk>\OP 030.
If you are uncomfortable with the pause at the end of op030set.bat,
you can comment out the "PAUSE" command in the last line of the
file.
•
Edit the file <Ziellaufwerk>\op030\op030bin\op030set.bat:
If you have not used the standard installation path c:\msvc when
installing Microsoft Visual C/C++ (MSVC), please correct the entry
for the MSVC tool directory
"set TOOLROOTDIR= c:\msvc" (default)
in accordance with your installation.
•
Reboot your computer to execute the commands in config.sys and
autoexec.bat.
•
Start MS-Windows and the MS-Visual Workbench.
•
Add an entry for your DOS directory to the"Executable Files Path"
in the <Optionen> -> <Directories> menu. Only then will the
makefiles be executed correctly.
•
Add the entry
;l:\public; l:\proj\h; l:\proj\app\h; l:\proh\std\h
to "Include Files Path" in the <Optionen> -> <Directories>
menu.
The Workbench searches these directories in order to determine
dependencies.
Development Kit (EU)
2 Installation
EU/2-9