Siemens SINUMERIK 840D Operator's Manual page 87

09.01
4.1.9 Application list directory file – ap_l_dir.h
Description
Syntax
Parameters
4.1.10 Standard list directory file – st_l_dir.h
Description
Syntax
Parameters
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the Operator Interface OP 030 (FBO) – 09.01 Edition
The application list directory file is located in L:\proj\h\ap_l_dir.h.
The application list directory ap_l_dir.h contains external descriptions
for all the list pointers for the lists of the application user area which
are included in more than one configuration source file.
EXTERN_list type (id) external list reference
id List identifier
The standard list directory is located in L:\proj\h\ap_l_dir.h.
The standard list directory st_l_dir.h contains external descriptions for
all the list pointers for the lists of the standard user area which are
used in more than one configuration source file.
A start and end identifier is not required for this purpose.
EXTERN_list type (id) external list reference
id List identifier
Development Kit (EU)
4 Extending the Application Configuration
EU/4-33