Introduction to Configuring (PSE)
1 Introduction
1.1
Structure of the documentation
PSE/1-4
The description of the functions for configuring the user interface for the
SINUMERIK OP 030 and MMC 100/HMI Embedded is subdivided into the
following documents:
OP 030
•
SINUMERIK OP 030 – Configuring Syntax (PS)
General Description of Configuring Syntax.
This description is delivered with the software and available as a pdf.
•
SINUMERIK OP 030 – Development Kit (EU)
Description of the environment for the development of a customized user
interface
•
SINUMERIK OP 030 – Operator's Guide (BA)
Operator's Guide for the standard operating functions
•
SINUMERIK OP 030 – Screen Kit (IK)
Guide for updating the software on a SINUMERIK OP 030
HMI Embedded
•
SINUMERIK 840D/810D – HMI Embedded Configuring Package
Installation, configuring and operating
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01