Siemens SINUMERIK 840D Operator's Manual page 124

Screen Kit: Software Update and Configuration (IK)
1 Software Installation
BD_OP030.TEA
IK/1-10
This file contains default settings for display machine data.
The OP 030 evaluates the following parameters:
MM_LCD_CONTRAST
MM_DISPLAY_TYPE
MM_DISPLAY_MODE
MM_FIRST_LANGUAGE
MM_DISPLAY_RESOLUTION
MM_PRG_DEFAULT_DIR
MM_DISPLAY_BLACK_TIME
MM_TABULATOR_SIZE
MM_DARKTIME_TO_PLC
MM_SWITCH_TO_AREA
MM_PLC_HOTKEY
MM_USER_CLASS_READ_ TOA
MM_USER_CLASS_WRITE_ TOA_GEO
MM_USER_CLASS_WRITE_ TOA_WEAR
MM_USER_CLASS_WRITE_ TOA_ADAPT
MM_USER_CLASS_WRITE_ZOA
MM_USER_CLASS_READ_GUD_LUD
MM_USER_CLASS_WRITE_GUD_LUD
MM_USER_CLASS_OVERSTORE_HIGH
MM_USER_CLASS_WRITE_ PRG_CONDIT
MM_USER_CLASS_WRITE_SEA
MM_USER_CLASS_READ_ PROGRAM
MM_USER_CLASS_WRITE_ PROGRAM
MM_USER_CLASS_SELECT_ PROGRAM
MM_USER_CLASS_TEACH_IN
MM_USER_CLASS_PRESET
MM_USER_CLASS_CLEAR_RPA
MM_USER_CLASS_WRITE_ RPA
MM_USER_CLASS_SEL_V24
MM_USER_CLASS_READ_ IN
MM_USER_CLASS_READ_CST
MM_USER_CLASS_READ_CUS
MM_TRACE
The following parameters are used as a default setting for the RS-232
interface:
MM_V24_USER_XON
MM_V24_USER_XOFF
MM_V24_USER_EOF
MM_V24_USER_CONTROLS
MM_V24_USER_RTS
MM_V24_USER_BAUD
MM_V24_USER_DATABITS
MM_V24_USER_PARITY
MM_V24_USER_STOPBIT
MM_V24_PRINTER_XON
MM_V24_PRINTER_XOFF
MM_V24_ PRINTER _EOF
MM_V24_ PRINTER _CONTROLS
MM_V24_ PRINTER _RTS
MM_V24_ PRINTER _BAUD
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
Must not be altered!
© Siemens AG, 2001. All rights reserved
09.01