What Is Stored Where - Siemens SINUMERIK 840D Operator's Manual

09.01
2.4

What is stored where?

© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
A brief overview of the relevant directories and files.
All paths refer to the virtual drive "L:".
In the \ directory
instutil Directory for OP 030 auxiliary programs
bin Run-time directory for OP 030 test.
public Directory for system configuration includes.
proj Directory for configuration source files.
dev_kit.txt Readme file for the changes in the config.sys,
autoexec.bat, op030set.bat.
op030set.bat Sets the environment variables and paths
for the OP 030 configuration environment.
In the \BIN directory
com030.bat Starts the MPI drivers.
comoff.bat Terminates the MPI drivers.
op030.exe PC simulation for OP 030.
bt0.ini Initialization file for the OP 030 start-up.
proj.dat Binary configuration file - the configured
user interface for OP 030.
proj_dat.ori Backup copy of the supplied
standard configuration file proj.dat.
*.sp? Language text files for the OP 030.
mmc0_txv.ini Initialization file for text and
languages.
sim.ovl Program for PC simulation mode.
bt0_con.cfg Variable defaults for PC simulation.
*.dir (files and
directories) For PC simulation (workpiece and
parts program overview).
bd_op030.tea Display Machine Data: File with
$MM_... parameters for
OP 030 configuration.
Development Kit (EU)
2 Installation
EU/2-11