Configuration Include File - Proj.h; Application Makefile - App.mak; Configuration Data Makefile - Siemens SINUMERIK 840D Operator's Manual

09.01
4.1.3 Configuration include file – proj.h
Description
Syntax
Note
4.1.4 Application makefile – app.mak
Description
4.1.5

Configuration data makefile

Description
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the Operator Interface OP 030 (FBO) – 09.01 Edition
The configuration include file - proj.h - contains all the C preprocessor
macros and C list definitions required for the configuration.
#include "proj.h"
The configuration include file must be the first include file to be included
in each configuration source file.
L:\proj\app\obj_c800\app.mak:
Project makefile for the application configuration.
Do not modify this file manually, it is managed by Visual Workbench
(Edit Project, Scan Dependencies) !
L:\proj\dat\makefile:
Project makefile for linking the application configuration and standard
configuration.
This makefile generates proj.dat and copies it to your L:\bin directory.
Development Kit (EU)
4 Extending the Application Configuration
EU/4-31