Read In Data - Siemens SINUMERIK 840D Operator's Manual

Operator's Guide (BA)
3 Operation
3.19

Read in data

Basic display
Basic display,
continued
BA/3-40
Fig. 3-34 Password
Only passwords consisting of numerical characters can be changed
here since the OP 030 features a numeric keypad only.
If the Password function is to be used, a numeric password must be
defined during NCK start-up.
You can read in data from an external device via the RS-232 interface.
When the Services user area (extension of basic menu) has been
selected, the following basic display appears:
Fig. 3-35 Basic display: Read in data
Press the "Continue" softkey to display the extended menu:
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01