Siemens SINUMERIK 840D Operator's Manual page 7

09.01
Warnings
!
!
!
Technical information
Trademarks
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
Additional ordering options
Appears in the documentation whenever a described function is not contained
in the standard version but may be ordered as an option.
The manual contains the following warnings that indicate various levels of
danger:
Danger
Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury or in substantial property damage.
Warning
Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury or in substantial property damage.
Caution
Used with the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury or in property
damage.
Caution
Used without safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
Notice
Used without the safety alert symbol indicates a potential situation which, if
not avoided, may result in an undesirable result or state.
MS-DOS ® and WINDOWS™ are registered trademarks of Microsoft
Corporation.
Configuring the OP 030 Operator Interface
Preface
▄
vii