User Interface; Create Application - Siemens SINUMERIK 840D Operator's Manual

Introduction to Configuring (PSE)
5 Steps for Configuring the OP 030
5.1

User interface

5.2

Create application

Create text for
application
Convert texts
PSE/5-28
The user interface is divided into the following areas:
Header
(global menu)
Configurable
display area
for window
(local menu)
Horizontal
softkeys
(data area bar)
An application can be created under the PROJ softkey.
1. Open application in Microsoft Visual C
2. Create texts
a) New application
1. In the DOS box, select the L:\PROJ\APP\TEXT directory
2. Call "NMAKE.EXE"
b)
Standard application:
1. In the DOS box, select the L:\PROJ\TEXT directory
2. Call "NMAKE.EXE"
Note:
The standard application must be converted at least once and, of
course, once again if further changes are made.
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
++
(MSVC)
© Siemens AG, 2001. All rights reserved
09.01