Siemens SINUMERIK 840D Operator's Manual page 6

Configuring the OP 030 Operator Interface
Preface
Search assistance
Qualified personnel
Proper use
!
Safety guidelines
Notes
!
vi
To ease your orientation, in addition to the main table of contents, we have
provided an index and table of contents by chapter for each manual. You will
also find a list of literature references in the appendix.
A device may only be commissioned and operated by qualified personnel.
Qualified personnel as referred to in the safety guidelines in this document are
persons who are authorized to start up, earth and label devices, systems and
circuits in accordance with the relevant safety standards.
Please note the following:
Warning
The device may only be used for the applications described in the catalog
and in the technical description, and only in combination with equipment,
devices and components from other manufacturers approved or
recommended by Siemens.
The safe and fault-free functioning of the device can only be guaranteed if its
transport, storage, assembly and installation, as well as its operation and
maintenance have been carried out correctly.
Note
This indicates a piece of important information relating to the product and/or
its operation, or highlights part of the documentation which requires special
attention.
This manual contains information intended to ensure your personal safety as
well as to prevent damage to products. Safety notices are highlighted by a
warning triangle and categorized according to level of risk as follows:
The following notes and symbols used as markers in the documentation are
particularly important:
Note
This symbol indicates that additional information follows.
Important
This symbol indicates that important information follows which must be
observed.
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01