Download  Print this page

Advertisement

Development Kit (EU)
7 OP 030 Operation
7.2.1

Key actions

Navigation mode
Edit mode
Overwrite field
contents
Edit mode
Change field
contents
Saving the input
Undo
Delete
single characters
Calculator
functions:
Addition,
subtraction
EU/7-54
You can normally switch between the individual fields with the arrow and
the Page Up and Page Down keys.
Position the cursor on the field you want to overwrite.
Enter the digits in the field.
Before you enter the digits the contents of the field are deleted
automatically by the system and the field is empty.
Position the cursor on the field you want to overwrite.
Open the field with the edit key.
The contents of the field are retained.
You can now use the arrow keys to position the cursor in the field in
order to edit the contents.
You can save the input using the input key or by exiting the field with the
Up Arrow or Down Arrow keys.
If you press the edit key again in edit mode, the data entered in your
field are not saved.
The field is closed and you are returned to navigation mode.
The value entered in the field before you switched to edit mode
reappears in the field.
In edit mode, you can use the backspace key to delete the character to
the immediate left of the cursor.
Depending on their configuration, the fields are equipped with a
calculator function enabling addition and subtraction operations to be
performed on the field contents.
Open the field in edit mode for insertion with the edit key.
Enter + or -.
Enter your second operator (value).
Complete the entry with the input key.
The result of the calculation appears in the field.
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01

Advertisement

This manual also for:

Sinumerik 810d

Comments to this Manuals

Symbols: 0
Latest comments: