Siemens SINUMERIK 840D Operator's Manual page 112

Development Kit (EU)
7 OP 030 Operation
Exit
Typical errors in
PC MPI mode
EU/7-58
You exit the OP 030 software by entering the key combination:
Ctrl+X then Return.
The MPI drivers are deinstalled by the command:
comoff.
bt0.ini missing
pc_test not set to 0.
MPI driver not loaded.
MPI card not connected correctly.
proj.dat missing.
*.sp1,2 files missing.
bd_tea.acc missing.
bd_OP030.tea missing.
You have insufficient main memory. You generally have more free
memory without MS-Windows.
You can increase the environment memory in the DOS box properties.
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01
▄