Download  Print this page

Advertisement

09.01
Parameterize
interface
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
Fig. 3-36
Basic display: Read in data, extended menu
The RS-232 interface and the external backup device must be adjusted
to each other.
The default settings are read from the BD_OP030.TEA file, which can
be edited during SW update.
Reference:
/FBO/, IK, Screen Kit
Press the "Settings" softkey to open the following input forms:
Fig. 3-37
Parameterize interface
Fig. 3-38
Special functions
These screen forms contain the default values and values already
defined by the user. For changing the values position the cursor onto an
input field and press the selection key repeatedly until the required
value is displayed.
Use the "+" and "–" keys to change the value in the "End of
transmission" field.
Operator's Guide (BA)
3 Operation
BA/3-41

Advertisement

This manual also for:

Sinumerik 810d

Comments to this Manuals

Symbols: 0
Latest comments: