Siemens SINUMERIK 840D Operator's Manual page 146

Introduction to Configuring (PSE)
3 Configuration Tools
3.1 OP 030
PSE/3-18
The following tools are provided for configuring the OP 030:
SCK/
Development Kit
Online help
Fig. 3-1 Tools for OP 030
1. Development Kit
With this you can
•
Create an application and/or change a standard application
•
Create multilingual texts
•
Change the machine configuration
•
Select the language (foreground and background language)
•
PC simulation
•
Transfer configuration to the control via the RS-232 interface
•
Create the installation disk
2. Online help
It consists of
•
Configuring Syntax (PS)
•
Development Kit (EU)
•
NC variable addresses
3. Microsoft Visual C Workbench
Only the compiler and editor are used.
In addition, you require the following software:
•
DOS 6.x
•
Windows 3.11
•
Microsoft Visual C
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
Disks
(RS-232-C)
++
1.5x
© Siemens AG, 2001. All rights reserved
09.01
Hard-
ware