Color Definitions; Open Window On Softkey Press In Application Area - Siemens SINUMERIK 840D Operator's Manual

09.01
4.4

Color definitions

Description
4.5

Open window on softkey press in application area

Objective
Procedure
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the Operator Interface OP 030 (FBO) – 09.01 Edition
Local notepad entries can be used for all ranges and can be
overwritten with entirely different contents.
Definition in L:\public\nb.h and L:\proj\app\h\nb_app.h
Global notepad entries for the OP 030 system software and
global notepad entries for the standard configuration:
Not for use in application configuration
Definition in L:\public\nb.h
Global notepad entries for application configuration:
Definition in L:\proj\app\h\nb_app.h
BLACK and WHITE are defined for the OP 030.
Open a separate new window by pressing a key in the prepared
application window.
1. Preparation
First make sure that the software version is correct by performing a
complete build:
Open L:\proj\makefile
Select <Project> <Build PROJ>
If the build is performed correctly (see section 3.1), you can continue
with the following steps and localize any faults (e.g. typing errors) more
quickly.
Verify that the software version functions correctly:
Start the OP 030 in the PC simulation.
Use the Area Switchover to change to the application window
Softkey 1 still has no function.
Development Kit (EU)
4 Extending the Application Configuration
EU/4-37