Download  Print this page

Advertisement

Development Kit (EU)
4 Extending the Application Configuration
EU/4-40
7. Include the new window in the existing application
Open the file L:\proj\app\src\app.c
Search for the character string TEMPLATE_W
Delete the comment characters immediately before and after the two
lines
RC_CLOSE_WINDOW (205, KEY_F1, W_APP, LOCAL, 1)
RC_OPEN_WINDOW (210, KEY_F1, W_TEMPLATE_W, LOCAL)
Replace the character string TEMPLATE_W - CAUTION: not
W_TEMPLATE !! - with APP_SUB1
Save app.c and select <Project> <Compile File app.c>
The compiler run should report 0 errors and 0 warnings.
8. Perform the complete compilation
Open L:\proj\makefile and select <Project> <Build> PROJ
Alternatively, enter the command "nmake" in the \proj catalog.
The files istw.c and sy_be_sk.c in proj\std are recompiled because they
are dependent on the modified .h files.
9. Run a test in the PC simulation
Start the OP 030 in the PC simulation.
Use the Area Switchover to change to the application window and test
the function of the softkey 1 and the Recall key.
SINUMERIK 840D/810D Configuring the Operator Interface OP 030 (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01

Advertisement

This manual also for:

Sinumerik 810d

Comments to this Manuals

Symbols: 0
Latest comments: