Control Via Contacts/Remote Contacts - BONFIGLIOLI Active cube Operation Manual

11.1

Control via contacts/remote contacts

In operation mode "Control via contacts" or "Control via remote contacts" (Parameter
Local/Remote
inputs S1IND (STOA and STOB), S2IND through EM-S3IND or via the individual bits of
the virtual digital signals in the control word. The function of these inputs is described
in the frequency inverter user manual.
15 14 13 12 11 10 9
The digital inputs set via the control word can be monitored using parameter
250. Digital input S1IND will only be displayed if controller release is switched
Inputs
on at STOA and STOB and the control word (Bit 0) was set. If the data set switching
function is used, please ensure that Parameter
trol via remote contacts" is set in all data sets used.
64
412 = 0 or 2), the frequency inverter is controlled directly via digital
Control word ( Local/ R em ote
8 7 6 5
ACU
Modbus/TCP
412 = 2)
4 3 2 1 0 Bit
0 S1IND (=STOA and STOB)
1 S2IND
2
S3IND
3
S4IND
4 S5IND
5 S6IND
6 MFI1D
7 EM-S1IND
8
EM-S2IND
9
EM-S3IND
10
-
11 -
12 -
13 -
14
-
15
-
412 is set to "2 – Con-
Local/Remote
Digital
10/13