BONFIGLIOLI Active cube Operation Manual page 57

Mode
1454
Override Modes
Of Operation
Target position
Speed
3)
Limitation
Acceleration
Deceleration
4)
Emergency stop
Quick Stop
1) The limitation results from
1118 of the position controller in Configuration x40, an increase above the Maximum Fre-
tation
quency can occur, because the output of the position controller is added to the Maximum Frequen-
cy.
2) Emergency stop or Deceleration is used depending on the stopping behavior
630 or the behavior in the case of communication errors
tion
10/13
Profile Positioning mode
1
1455
Override Target Position
1456
Override Profile Velocity
418
Minimum frequency
419
Maximum Frequency
1456
Override Acceleration
1458
Override Deceleration
1179
Emergency stop ramp
418 and
Minimum frequency
ACU
Modbus/TCP
419. Through
Maximum Frequency
Mode of opera-
Bus Error Behaviour
Limi-
388.
55