Smdr Output For Isdn; Isdn Disconnect Cause Code - Toshiba STRATA DK14 Installation And Maintenance Manual

ISDN Interfaces

SMDR Output for ISDN

SMDR Output for ISDN
See Figure 12-20 on Page 12-36

ISDN Disconnect Cause Code

The ISDN Cause Code provides information on how an ISDN call is terminated when an ISDN
line disconnects. The Cause Code displays only when this feature is enabled on the LCD of DKTs,
EKTs and Attendant Consoles.
ISDN Cause Code is turned On/Off for each telephone or console in Program 35, LED 08. LED 08
On enables Cause Code Display.
Previously, "CO LINE HANG UP!" or "CALL TERMINATED" displayed when an ISDN line
disconnected. This display no longer exists for ISDN calls with DK Release 4.3 software. These
messages do display if a non-ISDN call is terminated. The new cause code display function
replaces this existing message with more specific and useful information (call reference number,
direction of disconnection, and the reason for call termination).
Users can chose the option to display this information or not on each individual telephone or
console. This option is turned On or Off in system programming
16-48
for a sample SMDR printout and descriptions of each column.
Strata DK I&M 6/00